Cutting-Edge Emulsified Asphalt Device, Boosting Construction Efficiency

• Customization: Available
• After-sales Service: Video Technical Support/Online Support
• Warranty: 1year
• Weight (Kg): 8000
• Unique Selling Pointcontinuous Productio: Continuous Production
• Advantage: Labor Saving
• Melting Type: Continuous
• Productivity: 10-15t/H
• Transport Package: 40FT Container
• Specification: 11500*2300*2400
• Trademark: LIJIU
• Origin: China
• HS Code: 8474390000
• Production Capacity: 50units/Year

Product Description

Product Description

This product is used for the rapid melting of massive and bagged asphalt. It can solve the problems of uneven heating aging, slow melting rate and wasted energy consumption of the existing process oil tank.
Core four systems of this product:

1.  Rapid heating up system

The system can provide 900,000 calories per hour heat, heat conversion is more than 90%, the system is divided into two main parts. The main system is a rapid heating system, which provides 60 calories of heat per hour. The heating of asphalt mainly depends on the main system (note: the main system adopts direct heat heating, without thermal conduction medium, and should be immersed in the asphalt liquid level below 5 cm. It is recommended to maintain the liquid level for long-term use). The secondary system is the heat conduction medium, providing 300,000 kcal heat per hour. The main function is auxiliary heating. The auxiliary system is not restricted by the asphalt level. When the liquid level is lower than the main system, the secondary system can be used for asphalt heating and tank cleaning as usual.

1.  Solid asphalt constant temperature thermal cutting system

Solid asphalt constant temperature thermal cutting system is an adjustable thermostatic heat carrier circulation system to continuously and quickly divides large volume of solid asphalt into small pieces of asphalt with width of 5-10 cm. This system is the core system of solid asphalt melting of the equipment: 1. Increase the heating area of solid asphalt.2. The block asphalt is initially preheating and melted to the flow shape.
3. Horizontal mixing system
The system adopts the horizontal whole body mixing with the tank body, using 11 kw frequency conversion control power. When the asphalt temperature is low and the viscosity is large, and the solid asphalt is not completely melted, low speed mixing, the peristalsis movement of materials in the equipment to avoid the full integration of local high temperature and high and low temperature asphalt. When the asphalt is completely melted, high speed mixing can be carried out.
4. Hydraulic flap feeding system
Using the feeding mode of the heating plate, the feeding board has a heating device, working at 120ºC, can make the ton bag of asphalt smoothly into the equipment solid asphalt constant temperature thermal cutting system. Solid asphalt enters in the back section of the equipment, and the front section of hot asphalt is pumped out, which can form continuous feeding. After the feeding, the turning plate is closed to forming a confined space, reducing the heat loss and improving the melting speed.

 

Product Parameters

 
            

Number	Name	quantity	Company	parameter	remarks
One	Asphalt system
1	Asphalt conveying pump	1	platform	3QGB45-2-40	4KW, insulation jacket pump, flow rate: 6 cubic meters, pressure: 0.6MPa, (variable frequency speed regulation)
2	Asphalt flowmeter	1	platform	Lc-utne40.2	DN40
3	Pneumatic valve	1	platform	DN50
4	filter	1	set
Two	Soap system
1	Hot water heating box	1	platform	1.5m3	Equipped with 51 thermal oil heating coils and 50mm rock wool insulation wrapped in stainless steel plate.
2	Soap can	2	platform	1.5m3	1.5KW, made of 304 stainless steel material, stainless steel double slurry mixer with liquid level display.
3	Additive addition tank	1	platform	0.15m3	304 stainless steel material, stainless steel double straight slurry mixer.
4	Additive addition pump	1	platform	3m3	1.5KW, gear pump
5	Soap liquid stainless steel multi-stage pump	1	platform	DFL-50-32-160D	Motor power 2.2KW, flow rate: 10 cubic meters, equipped with stainless steel check valve (special anti-corrosion, alkali resistant, acid resistant. permanently leak free)
6	Pneumatic valve	4	platform	Q641F-16P
7	Flowmeter	1	platform	Ldjb-040sm2	DN40
8	weighing system	3	set		Weighing and measuring
Three	Finished product system
1	Cooling heat exchanger	1	platform	KS016-5-304-N	20square meter heat exchange area
2	Finished product box	1	platform	3 tons	carbon steel
3	Finished pump	1	platform	2.2kw	1.5KW, submersible finished product pump output
4	stir	1	platform	1.5kw	Worm gear double straight slurry mixer
Four	Host control and accessories
1	Emulsifying mill	1	platform	LJ-13	Motor power 37KW, speed: 2950min
2	Control	1	set	Composite components	PLC automatic proportioning system
3	Weighing auxiliary display	1	platform		Color screen display
4	Air compressor	1	platform	3KW
Five	frame
1	frame	1		7700*2300*2500	Frame 100 * 100 square tube base 120 * 120 square tube
2	colour				ash

 
                        
                        
                        
                        
                                       
 

FAQ

 

 

Q: How's about the payment terms?

A: We usually accept T/T, LC. T/T: 30% in advance as down payment, the balance before delivery.

 

Q: How's about the trade terms?

A: EXW, FOB, CFR and CIF are acceptable.

 

Q: How about the delivery time?

A: Usually we need about 20 days production time after down pay.

 

Q: How about after-sale service?

A: Our products' quality warranty is one year after delivery, we can provide online support, also can send out our engineers to your place if you want.

 

Q: What should I do for the quality problems?

A: If you meet quality problems please send to me the products photo first ,our after service department will deal with for you.